Setting Up Your Lumi
How do I use the sensor?
To use the sensor, make sure it is set up and paired with your app (see “How do I set up the sensor?”). Attach the sensor on the dotted line of your Lumi by Pampers diaper. At each change of diaper, peel the sensor off, and place it on the next diaper. The app will notify you when the sensor battery runs low. Keep the sensor clean by wiping it with a damp cloth, baby wipe, or alcohol wipe regularly.

How do I wall-mount the video monitor?
Find a spot above the crib, near a power outlet.
Detach the monitor from the dock and remove the cover plate to reveal the screw holes. Hold the dock against the wall (cable pointing down) and mark the hole positions with a pencil. Drill the two holes and insert the anchors provided. Screw the dock to the wall and place the cover plate back on. Secure the monitor cable to the wall using the clips provided.
Once the mount is secured, carefully reattach the video monitor, making sure it is secure–you should hear "clicks" on both sides.
Watch the video below for a step-by-step guide.

Other cautionary information
SMART SLEEP SENSOR CAUTION: THIS PRODUCT IS NOT A TOY, AND SHOULD BE KEPT OUT OF REACH OF CHILDREN AND PETS. SEE USER MANUAL
SMART SLEEP SENSOR WARNING:
CONTAINS BUTTON OR COIN CELL BATTERY. HAZARDOUS IF SWALLOWED – SEE USER MANUAL.
VIDEO MONITOR WARNING:
STRANGULATION HAZARD—CHILDREN HAVE STRANGLED IN CORDS. KEEP THE CORD OUT OF THE REACH OF CHILDREN (MORE THAN 3 FT (0.9 M) AWAY). NEVER PLACE THE CAMERA OR CORD INSIDE THE CRIB OR CHILD SLEEPING AREA. THIS PRODUCT IS NOT INTENDED TO REPLACE PROPER SUPERVISION OF CHILDREN. KEEP OUT OF REACH OF CHILDREN. THIS IS NOT A TOY OR CHILDREN’S PRODUCT AND IS INTENDED FOR ADULT USE ONLY.